Welkom bij de nieuwe webshop van Milispec International b.v.

Milispec Lubricants levert speciale smeermiddelen voor de luchtvaart-, offshore- en defensie-industrie.
Milispec Sampling en Analysing ontwikkelt en verkoopt speciale producten om de kwaliteit van brandstoffen en drinkwater te controleren.

Voor beide business units is er nu 1 webshop waar de meest gangbare handelsproducten in worden aangeboden. Verwacht u een product in ons assortiment en vindt u het niet terug, neem dan even contact op met één van onze medewerkers.

De prijzen in de webshop zijn inclusief BTW.

Resultaat 1–9 van de 39 resultaten wordt getoond

  • AeroShell Grease 33, 3 kg can

    139.96

    Specifications, approvals & recommendations:
    – Approved MIL-PRF-23827C Type I
    – Approved BMS 3-33B
    – Approved AIMS 09-06-002
    – COMAC Approved to QPL-CMS-OL-302

    Compatibility & Miscibility:
    Aeroshell Grease 33 contains a synthetic oil and must not be used with incompatible seal materials.

  • MLA 900 Conductivity meter, 0-1999 pS/m F-34

    MLA900, the measuring instrument for mobile use
    The MLA900 is suitable for measurements of the
    electrical conductivity and temperature of light mineral
    oils (kerosene) in plants and laboratories. The device
    shows whether the safety-relevant conductivity value
    has been reached by adding sufficient additives.
    Liquids with too low electrical conductivity can become
    electrostatically charged. If they are combustible
    liquids, there is a risk of ignition from sparking during
    electrostatic discharge. Therefore, the conductivity is
    increased with additives in petroleum products such
    as kerosene and light mineral oils. The electrostatic
    charge is discharged to the tank or pipeline wall. The
    MLA900 is certified for use in the explosive range up
    to zone 0 and is listed in ASTM D2624 as a measuring
    instrument.

  • AeroShell Fluid 41, 203 liter

    2,687.35

    Specifications, approvals & recommendations:
    – COMAC approved to QPL-CMS-OL-104
    – Approved MIL-PRF-5606H
    – Approved DEF STAN 91-48 Grade Superclean
    – Meets DEF STAN 91-48 Grade Normal
    – Approved DCSEA 415/A
    – Analogue to AMG-10
    – Nato-code H-515
    – JSD OM-15

  • AeroShell Grease 64, 400 gram cartridge

    0.00

    Specifications, approvals & recommendations:
    – COMAC approved to QPL-CMS-OL-311
    – Approved MIL-G-21164D
    – Approved DEF STAN 91-57
    – Equivalent DCSEA 353/A
    – Nato-code G-353
    – JSD XG-276

    Compatibility & miscibility:
    Aeroshell Grease 64 contains a synthetic oil and must not be used with incompatible seal materials.

  • AeroShell Oil Diesel Ultra, 1 liter can

    16.25

    Specifications, approvals & recommendations:
    Aeroshell Oil Diesel Ultra is approved to Mercedes Benz specification 229.5, recognised and required by the leading Diesel aero engine manufacturers.

    Approved for use in the following engines:
    Whilst this is correct at the time of writing, testing is ongoing to extend this approval listing as new engines are produced.
    – Thielert/Centurion engines: 1.7 & 2.0 Centurion (other models yet to be produced).
    – SMA: SR305-230E
    – Austro Engine: AE300
    – Mercedes Benz: MB 229.5
    – ACEA: meets the requirements of A3/B4
    – API: meets the requirements of SL/CF
    – SAE: viscosity grade 5W-30

  • AeroShell Grease 33, 400 gram cartridge

    0.00

    Specifications, approvals & recommendations:
    – Approved MIL-PRF-23827C Type I
    – Approved BMS 3-33B
    – Approved AIMS 09-06-002
    – COMAC Approved to QPL-CMS-OL-302

    Compatibility & Miscibility:
    Aeroshell Grease 33 contains a synthetic oil and must not be used with incompatible seal materials.

    Compatibility & Miscibility:
    Aeroshell Grease 33 contains a synthetic oil and must not be used with incompatible seal materials.

  • AeroShell Grease 64, 3 kg can

    155.79

    Specifications, approvals & recommendations:
    – COMAC approved to QPL-CMS-OL-311
    – Approved MIL-G-21164D
    – Approved DEF STAN 91-57
    – Equivalent DCSEA 353/A
    – Nato-code G-353
    – JSD XG-276

    Compatibility & miscibility:
    Aeroshell Grease 64 contains a synthetic oil and must not be used with incompatible seal materials.

  • AeroShell Oil 100, 1/4 USG can

    10.06

    Specfications, approvals & recommendations:
    – SAE J-1966 (replaces MIL-L-6082E)
    – Approved J-1966 SAE Grade 50
    – Equivalent AIR 3560/D Grade SAE 50.
    – Russian: MS-20
    – Nato-code O-117
    – JSD OM-270

  • AeroShell Oil 80, 1/4 USG can

    10.85

    Specfications, approvals & recommendations:
    – SAE J-1966 (replaces MIL-L-6082E)
    – Approved J-1966 SAE Grade 50
    – Equivalent AIR 3560/D Grade SAE 50.
    – Russian: MS-20
    – Nato-code O-117
    – JSD OM-270